wiki:TracIni

The Trac Configuration File

[Note To Editors] Please discuss documentation changes in the #Discussion section. Even better, send us documentation patches? against the code (i.e. where the configuration entries are documented), either on Trac-dev or on new tickets.

Trac configuration is done by editing the trac.ini config file, located in <projectenv>/conf/trac.ini. Changes to the configuration are usually reflected immediately, though changes to the [components] or [logging] sections will require restarting the web server. You may also need to restart the web server after creating a global configuration file when none was previously present.

The trac.ini configuration file and its parent directory should be writable by the web server, as Trac currently relies on the possibility to trigger a complete environment reload to flush its caches.

Global Configuration

In versions prior to 0.11, the global configuration was by default located in $prefix/share/trac/conf/trac.ini or /etc/trac/trac.ini, depending on the distribution. If you're upgrading, you may want to specify that file to inherit from. Literally, when you're upgrading to 0.11, you have to add an [inherit] section to your project's trac.ini file. Additionally, you have to move your customized templates and common images from $prefix/share/trac/... to the new location.

Global options will be merged with the environment-specific options, where local options override global options. The options file is specified as follows:

[inherit]
file = /path/to/global/trac.ini

Multiple files can be specified using a comma-separated list.

Note that you can also specify a global option file when creating a new project, by adding the option --inherit=/path/to/global/trac.ini to trac-admin's initenv command. If you do not do this but nevertheless intend to use a global option file with your new environment, you will have to go through the newly generated conf/trac.ini file and delete the entries that will otherwise override those set in the global file.

There are two more entries in the [inherit] section, templates_dir for sharing global templates and plugins_dir, for sharing plugins. Those entries can themselves be specified in the shared configuration file, and in fact, configuration files can even be chained if you specify another [inherit] file there.

Note that the templates found in the templates/ directory of the TracEnvironment have precedence over those found in [inherit] templates_dir. In turn, the latter have precedence over the installed templates, so be careful about what you put there, notably if you override a default template be sure to refresh your modifications when you upgrade to a new version of Trac (the preferred way to perform TracInterfaceCustomization being still to write a custom plugin doing an appropriate ITemplateStreamFilter transformation).

Reference for settings

This is a brief reference of available configuration options, and their default settings.

[account-manager]

account_changes_notify_addresses

List of email addresses that get notified of user changes, ie, new user, password change and delete user.

(no default)
allow_delete_account

Allow users to delete their own account.

enabled
auth_init

Launch an initial Trac authentication setup.

enabled
cookie_refresh_pct

Persistent sessions randomly get a new session cookie ID with likelihood in percent per work hour given here (zero equals to never) to decrease vulnerability of long-lasting sessions.

10
db_htdigest_realm

Realm to select relevant htdigest db entries

(no default)
email_regexp

A validation regular expression describing new account emails. Define constraints for a valid email address. A custom pattern can narrow or widen scope i.e. to accept UTF-8 characters.

(?i)^[A-Z0-9._%+-]+@(?:[A-Z0-9-]+\.)+[A-Z0-9-]{2,63}$
environ_auth_overwrite

Whether environment variable REMOTE_USER should get overwritten after processing login form input. Otherwise it will only be set, if unset at the time of authentication.

enabled
force_passwd_change

Force the user to change password when it's reset.

enabled
generated_password_length

Length of the randomly-generated passwords created when resetting the password for an account.

8
hash_method

IPasswordHashMethod used to create new/updated passwords

HtDigestHashMethod
htdigest_file

Path relative to Trac environment or full host machine path to password file

(no default)
htdigest_realm

Realm to select relevant htdigest file entries

(no default)
login_opt_list

Set to True, to switch login page style showing alternative actions in a single listing together.

disabled
notify_actions

Comma separated list of actions to notify of. Available actions 'new', 'change', 'delete'.

password_store

Ordered list of password stores, queried in turn.

(no default)
persistent_sessions

Allow the user to be remembered across sessions without needing to re-authenticate. This is, user checks a "Remember Me" checkbox and, next time he visits the site, he'll be remembered.

disabled
refresh_passwd

Re-set passwords on successful authentication. This is most useful to move users to a new password store or enforce new store configuration (i.e. changed hash type), but should be disabled/unset otherwise.

disabled
register_basic_question

A question to ask instead of the standard prompt, to which the value of register_basic_token is the answer. Setting to empty string (default value) keeps the standard prompt.

(no default)
register_basic_token

A string required as input to pass verification.

(no default)
register_check

Ordered list of IAccountRegistrationInspector's to use for registration checks.

BasicCheck, EmailCheck, BotTrapCheck, RegExpCheck, UsernamePermCheck
require_approval

Whether account registration requires administrative approval to enable the account or not.

disabled
reset_password

Set to False, if there is no email system setup.

enabled
username_char_blacklist

Always exclude some special characters from usernames. This is enforced upon new user registration.

:[]
username_regexp

A validation regular expression describing new usernames. Define constraints for allowed user names corresponding to local naming policy.

(?i)^[A-Z0-9.\-_]{5,}$
verify_email

Verify the email address of Trac users.

enabled

[attachment]

max_size

Maximum allowed file size (in bytes) for attachments.

262144
max_zip_size

Maximum allowed total size (in bytes) for an attachment list to be downloadable as a .zip. Set this to -1 to disable download as .zip. (since 1.0)

2097152
render_unsafe_content

Whether attachments should be rendered in the browser, or only made downloadable.

Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to attach a file containing cross-site scripting attacks.

For public sites where anonymous users can create attachments it is recommended to leave this option disabled (which is the default).

false

[browser]

color_scale

Enable colorization of the age column.

This uses the same color scale as the source code annotation: blue is older, red is newer. (since 0.11)

enabled
downloadable_paths

List of repository paths that can be downloaded.

Leave this option empty if you want to disable all downloads, otherwise set it to a comma-separated list of authorized paths (those paths are glob patterns, i.e. "*" can be used as a wild card). In a multi-repository environment, the path must be qualified with the repository name if the path does not point to the default repository (e.g. /reponame/trunk). Note that a simple prefix matching is performed on the paths, so aliases won't get automatically resolved. (since 0.10)

/trunk, /branches/*, /tags/*
hide_properties

Comma-separated list of version control properties to hide from the repository browser. (since 0.9)

svk:merge
intermediate_color

(r,g,b) color triple to use for the color corresponding to the intermediate color, if two linear interpolations are used for the color scale (see intermediate_point). If not set, the intermediate color between oldest_color and newest_color will be used. (since 0.11)

(no default)
intermediate_point

If set to a value between 0 and 1 (exclusive), this will be the point chosen to set the intermediate_color for interpolating the color value. (since 0.11)

(no default)
newest_color

(r,g,b) color triple to use for the color corresponding to the newest color, for the color scale used in blame or the browser age column if color_scale is enabled. (since 0.11)

(255, 136, 136)
oldest_color

(r,g,b) color triple to use for the color corresponding to the oldest color, for the color scale used in blame or the browser age column if color_scale is enabled. (since 0.11)

(136, 136, 255)
oneliner_properties

Comma-separated list of version control properties to render as oneliner wiki content in the repository browser.

(since 0.11)

trac:summary
render_unsafe_content

Whether raw files should be rendered in the browser, or only made downloadable.

Pretty much any file may be interpreted as HTML by the browser, which allows a malicious user to create a file containing cross-site scripting attacks.

For open repositories where anyone can check-in a file, it is recommended to leave this option disabled (which is the default).

false
wiki_properties

Comma-separated list of version control properties to render as wiki content in the repository browser.

(since 0.11)

trac:description

[changeset]

max_diff_bytes

Maximum total size in bytes of the modified files (their old size plus their new size) for which the changeset view will attempt to show the diffs inlined (since 0.10).

10000000
max_diff_files

Maximum number of modified files for which the changeset view will attempt to show the diffs inlined (since 0.10).

0
wiki_format_messages

Whether wiki formatting should be applied to changeset messages.

If this option is disabled, changeset messages will be rendered as pre-formatted text.

true

[components]

This section is used to enable or disable components provided by plugins, as well as by Trac itself. The component to enable/disable is specified via the name of the option. Whether its enabled is determined by the option value; setting the value to enabled or on will enable the component, any other value (typically disabled or off) will disable the component.

The option name is either the fully qualified name of the components or the module/package prefix of the component. The former enables/disables a specific component, while the latter enables/disables any component in the specified package/module.

Consider the following configuration snippet:

[components]
trac.ticket.report.ReportModule = disabled
webadmin.* = enabled

The first option tells Trac to disable the report module. The second option instructs Trac to enable all components in the webadmin package. Note that the trailing wildcard is required for module/package matching.

To view the list of active components, go to the Plugins page on About Trac (requires CONFIG_VIEW permissions).

See also: TracPlugins

[git]

cached_repository

Wrap GitRepository in CachedRepository.

false
git_bin

Path to the git executable.

git
git_fs_encoding

Define charset encoding of paths within git repositories.

utf-8
persistent_cache

Enable persistent caching of commit tree.

false
projects_base

Path to the base of your git projects

(no default)
projects_list

Path to a gitweb-formatted projects.list

(no default)
projects_url

Template for project URLs. %s will be replaced with the repo name

(no default)
shortrev_len

The length at which a sha1 should be abbreviated to (must be >= 4 and <= 40).

7
trac_user_rlookup

Enable reverse mapping of git email addresses to trac user ids. Performance will be reduced if there are many users and the cached_repository option is disabled.

A repository resync is required after changing the value of this option.

false
use_committer_id

Use git-committer id instead of git-author id for the changeset Author field.

true
use_committer_time

Use git-committer timestamp instead of git-author timestamp for the changeset Timestamp field.

true
wikishortrev_len

The minimum length of an hex-string for which auto-detection as sha1 is performed (must be >= 4 and <= 40).

40

[github]

username_prefix

A unique username prefix for all users authenticated via GitHub? (as opposed to any other authentication method).

(no default)
webhook_secret

GitHub? webhook secret token. Uppercase environment variable name, filename starting with '/' or './', or plain string.

(no default)

[header_logo]

alt

Alternative text for the header logo.

(please configure the [header_logo] section in trac.ini)
height

Height of the header logo image in pixels.

-1
link

URL to link to, from the header logo.

(no default)
src

URL of the image to use as header logo. It can be absolute, server relative or relative.

If relative, it is relative to one of the /chrome locations: site/your-logo.png if your-logo.png is located in the htdocs folder within your TracEnvironment; common/your-logo.png if your-logo.png is located in the folder mapped to the htdocs_location URL. Only specifying your-logo.png is equivalent to the latter.

site/your_project_logo.png
width

Width of the header logo image in pixels.

-1

[inherit]

htdocs_dir

Path to the shared htdocs directory.

Static resources in that directory are mapped to /chrome/shared under the environment URL, in addition to common and site locations.

This can be useful in site.html for common interface customization of multiple Trac environments.

(since 1.0)

(no default)
plugins_dir

Path to the shared plugins directory.

Plugins in that directory are loaded in addition to those in the directory of the environment plugins, with this one taking precedence.

(since 0.11)

(no default)
templates_dir

Path to the shared templates directory.

Templates in that directory are loaded in addition to those in the environments templates directory, but the latter take precedence.

(since 0.11)

(no default)

[intertrac]

This section configures InterTrac prefixes. Options in this section whose name contain a "." define aspects of the InterTrac prefix corresponding to the option name up to the ".". Options whose name don't contain a "." define an alias.

The .url is mandatory and is used for locating the other Trac. This can be a relative URL in case that Trac environment is located on the same server.

The .title information is used for providing a useful tooltip when moving the cursor over an InterTrac link.

The .compat option can be used to activate or disable a compatibility mode:

  • If the targeted Trac is running a version below 0.10 (r3526 to be precise), then it doesn't know how to dispatch an InterTrac link, and it's up to the local Trac to prepare the correct link. Not all links will work that way, but the most common do. This is called the compatibility mode, and is false by default.
  • If you know that the remote Trac knows how to dispatch InterTrac links, you can explicitly disable this compatibility mode and then any TracLinks can become InterTrac links.

Example configuration:

[intertrac]
# -- Example of setting up an alias:
t = trac

# -- Link to an external Trac:
trac.title = Edgewall's Trac for Trac
trac.url = http://trac.edgewall.org

[interwiki]

Every option in the [interwiki] section defines one InterWiki prefix. The option name defines the prefix. The option value defines the URL, optionally followed by a description separated from the URL by whitespace. Parametric URLs are supported as well.

Example:

[interwiki]
MeatBall = http://www.usemod.com/cgi-bin/mb.pl?
PEP = http://www.python.org/peps/pep-$1.html Python Enhancement Proposal $1
tsvn = tsvn: Interact with TortoiseSvn

[logging]

log_file

If log_type is file, this should be a path to the log-file. Relative paths are resolved relative to the log directory of the environment.

trac.log
log_format

Custom logging format.

If nothing is set, the following will be used:

Trac[$(module)s] $(levelname)s: $(message)s

In addition to regular key names supported by the Python logger library (see http://docs.python.org/library/logging.html), one could use:

  • $(path)s the path for the current environment
  • $(basename)s the last path component of the current environment
  • $(project)s the project name

Note the usage of $(...)s instead of %(...)s as the latter form would be interpreted by the ConfigParser? itself.

Example: ($(thread)d) Trac[$(basename)s:$(module)s] $(levelname)s: $(message)s

(since 0.10.5)

(no default)
log_level

Level of verbosity in log.

Should be one of (CRITICAL, ERROR, WARN, INFO, DEBUG).

DEBUG
log_type

Logging facility to use.

Should be one of (none, file, stderr, syslog, winlog).

none

[milestone]

stats_provider

Name of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the milestone views.

DefaultTicketGroupStatsProvider

[milestone-groups]

As the workflow for tickets is now configurable, there can be many ticket states, and simply displaying closed tickets vs. all the others is maybe not appropriate in all cases. This section enables one to easily create groups of states that will be shown in different colors in the milestone progress bar.

Note that the groups can only be based on the ticket status, nothing else. In particular, it's not possible to distinguish between different closed tickets based on the resolution.

Example configuration with three groups, closed, new and active (the default only has closed and active):

# the 'closed' group correspond to the 'closed' tickets
closed = closed

# .order: sequence number in the progress bar
closed.order = 0

# .query_args: optional parameters for the corresponding
#              query.  In this example, the changes from the
#              default are two additional columns ('created' and
#              'modified'), and sorting is done on 'created'.
closed.query_args = group=resolution,order=time,col=id,col=summary,col=owner,col=type,col=priority,col=component,col=severity,col=time,col=changetime

# .overall_completion: indicates groups that count for overall
#                      completion percentage
closed.overall_completion = true

new = new
new.order = 1
new.css_class = new
new.label = new

# Note: one catch-all group for other statuses is allowed
active = *
active.order = 2

# .css_class: CSS class for this interval
active.css_class = open

# .label: displayed label for this group
active.label = in progress

The definition consists in a comma-separated list of accepted status. Also, '*' means any status and could be used to associate all remaining states to one catch-all group.

The CSS class can be one of: new (yellow), open (no color) or closed (green). Other styles can easily be added using custom CSS rule: table.progress td.<class> { background: <color> } to a site/style.css file for example.

(since 0.11)

[mimeviewer]

max_preview_size

Maximum file size for HTML preview. (since 0.9)

262144
mime_map

List of additional MIME types and keyword mappings. Mappings are comma-separated, and for each MIME type, there's a colon (":") separated list of associated keywords or file extensions. (since 0.10)

text/x-dylan:dylan, text/x-idl:ice, text/x-ada:ads:adb
mime_map_patterns

List of additional MIME types associated to filename patterns. Mappings are comma-separated, and each mapping consists of a MIME type and a Python regexp used for matching filenames, separated by a colon (":"). (since 1.0)

text/plain:README|INSTALL|COPYING.*
pygments_default_style

The default style to use for Pygments syntax highlighting.

trac
pygments_modes

List of additional MIME types known by Pygments.

For each, a tuple mimetype:mode:quality has to be specified, where mimetype is the MIME type, mode is the corresponding Pygments mode to be used for the conversion and quality is the quality ratio associated to this conversion. That can also be used to override the default quality ratio used by the Pygments render.

(no default)
tab_width

Displayed tab width in file preview. (since 0.9)

8
treat_as_binary

Comma-separated list of MIME types that should be treated as binary data. (since 0.11.5)

application/octet-stream, application/pdf, application/postscript, application/msword, application/rtf
add_items

Items that will be added to the navigation

(no default)

[notification]

admit_domains

Comma-separated list of domains that should be considered as valid for email addresses (such as localdomain).

(no default)
always_notify_owner

Always send notifications to the ticket owner (since 0.9).

false
always_notify_reporter

Always send notifications to any address in the reporter field.

false
always_notify_updater

Always send notifications to the person who causes the ticket property change and to any previous updater of that ticket.

true
ambiguous_char_width

Which width of ambiguous characters (e.g. 'single' or 'double') should be used in the table of notification mail.

If 'single', the same width as characters in US-ASCII. This is expected by most users. If 'double', twice the width of US-ASCII characters. This is expected by CJK users. (since 0.12.2)

single
batch_subject_template

Like ticket_subject_template but for batch modifications.

By default, the template is $prefix Batch modify: $tickets_descr. (since 1.0)

$prefix Batch modify: $tickets_descr
email_sender

Name of the component implementing IEmailSender.

This component is used by the notification system to send emails. Trac currently provides SmtpEmailSender for connecting to an SMTP server, and SendmailEmailSender for running a sendmail-compatible executable. (since 0.12)

SmtpEmailSender
ignore_domains

Comma-separated list of domains that should not be considered part of email addresses (for usernames with Kerberos domains).

(no default)
message_id_hash

Hash algorithm to create unique Message-ID header. (since 1.0.13)

md5
mime_encoding

Specifies the MIME encoding scheme for emails.

Valid options are 'base64' for Base64 encoding, 'qp' for Quoted-Printable, and 'none' for no encoding, in which case mails will be sent as 7bit if the content is all ASCII, or 8bit otherwise. (since 0.10)

none
sendmail_path

Path to the sendmail executable.

The sendmail program must accept the -i and -f options. (since 0.12)

sendmail
smtp_always_bcc

Email address(es) to always send notifications to, addresses do not appear publicly (Bcc:). (since 0.10)

(no default)
smtp_always_cc

Email address(es) to always send notifications to, addresses can be seen by all recipients (Cc:).

(no default)
smtp_default_domain

Default host/domain to append to address that do not specify one.

(no default)
smtp_enabled

Enable email notification.

false
smtp_from

Sender address to use in notification emails.

trac@localhost
smtp_from_author

Use the action author as the sender of notification emails. (since 1.0)

false
smtp_from_name

Sender name to use in notification emails.

(no default)
smtp_password

Password for SMTP server. (since 0.9)

(no default)
smtp_port

SMTP server port to use for email notification.

25
smtp_replyto

Reply-To address to use in notification emails.

trac@localhost
smtp_server

SMTP server hostname to use for email notifications.

localhost
smtp_subject_prefix

Text to prepend to subject line of notification emails.

If the setting is not defined, then the [$project_name] prefix. If no prefix is desired, then specifying an empty option will disable it. (since 0.10.1)

__default__
smtp_user

Username for SMTP server. (since 0.9)

(no default)
ticket_subject_template

A Genshi text template snippet used to get the notification subject.

By default, the subject template is $prefix #$ticket.id: $summary. $prefix being the value of the smtp_subject_prefix option. (since 0.11)

$prefix #$ticket.id: $summary
use_public_cc

Recipients can see email addresses of other CC'ed recipients.

If this option is disabled (the default), recipients are put on BCC. (since 0.10)

false
use_short_addr

Permit email address without a host/domain (i.e. username only).

The SMTP server should accept those addresses, and either append a FQDN or use local delivery. (since 0.10)

false
use_tls

Use SSL/TLS to send notifications over SMTP. (since 0.10)

false

[project]

admin

E-Mail address of the project's administrator.

(no default)
admin_trac_url

Base URL of a Trac instance where errors in this Trac should be reported.

This can be an absolute or relative URL, or '.' to reference this Trac instance. An empty value will disable the reporting buttons. (since 0.11.3)

.
descr

Short description of the project.

My example project
footer

Page footer text (right-aligned).

Visit the Trac open source project at<br /><a href="http://trac.edgewall.org/">http://trac.edgewall.org/</a>
icon

URL of the icon of the project.

common/trac.ico
name

Name of the project.

My Project
url

URL of the main project web site, usually the website in which the base_url resides. This is used in notification e-mails.

(no default)

[query]

default_anonymous_query

The default query for anonymous users. The query is either in query language syntax, or a URL query string starting with ? as used in query: Trac links. (since 0.11.2)

status!=closed&cc~=$USER
default_query

The default query for authenticated users. The query is either in query language syntax, or a URL query string starting with ? as used in query: Trac links. (since 0.11.2)

status!=closed&owner=$USER
items_per_page

Number of tickets displayed per page in ticket queries, by default (since 0.11)

100
ticketlink_query

The base query to be used when linkifying values of ticket fields. The query is a URL query string starting with ? as used in query: Trac links. (since 0.12)

?status=!closed

[repositories]

One of the alternatives for registering new repositories is to populate the [repositories] section of the trac.ini.

This is especially suited for setting up convenience aliases, short-lived repositories, or during the initial phases of an installation.

See TracRepositoryAdmin for details about the format adopted for this section and the rest of that page for the other alternatives.

(since 0.12)

[revisionlog]

default_log_limit

Default value for the limit argument in the TracRevisionLog. (since 0.11)

100
graph_colors

Comma-separated list of colors to use for the TracRevisionLog graph display. (since 1.0)

#cc0,#0c0,#0cc,#00c,#c0c,#c00

[roadmap]

stats_provider

Name of the component implementing ITicketGroupStatsProvider, which is used to collect statistics on groups of tickets for display in the roadmap views.

DefaultTicketGroupStatsProvider

[search]

default_disabled_filters

Specifies which search filters should be disabled by default on the search page. This will also restrict the filters for the quick search function. The filter names defined by default components are: wiki, ticket, milestone and changeset. For plugins, look for their implementation of the ISearchSource interface, in the get_search_filters() method, the first member of returned tuple. Once disabled, search filters can still be manually enabled by the user on the search page. (since 0.12)

(no default)
min_query_length

Minimum length of query string allowed when performing a search.

3

[sqlite]

extensions

Paths to sqlite extensions, relative to Trac environment's directory or absolute. (since 0.12)

(no default)

[ticket]

commit_ticket_update_check_perms

Check that the committer has permission to perform the requested operations on the referenced tickets.

This requires that the user names be the same for Trac and repository operations.

true
commit_ticket_update_commands.close

Commands that close tickets, as a space-separated list.

close closed closes fix fixed fixes
commit_ticket_update_commands.refs

Commands that add a reference, as a space-separated list.

If set to the special value <ALL>, all tickets referenced by the message will get a reference to the changeset.

addresses re references refs see
commit_ticket_update_envelope

Require commands to be enclosed in an envelope.

Must be empty or contain two characters. For example, if set to "[]", then commands must be in the form of [closes #4].

(no default)
commit_ticket_update_notify

Send ticket change notification when updating a ticket.

true
default_cc

Default cc: list for newly created tickets.

(no default)
default_component

Default component for newly created tickets.

(no default)
default_description

Default description for newly created tickets.

(no default)
default_keywords

Default keywords for newly created tickets.

(no default)
default_milestone

Default milestone for newly created tickets.

(no default)
default_owner

Default owner for newly created tickets.

< default >
default_priority

Default priority for newly created tickets.

major
default_resolution

Default resolution for resolving (closing) tickets (since 0.11).

fixed
default_severity

Default severity for newly created tickets.

(no default)
default_summary

Default summary (title) for newly created tickets.

(no default)
default_type

Default type for newly created tickets (since 0.9).

defect
default_version

Default version for newly created tickets.

(no default)
max_comment_size

Maximum allowed comment size in characters. (since 0.11.2).

262144
max_description_size

Maximum allowed description size in characters. (since 0.11).

262144
max_summary_size

Maximum allowed summary size in characters. (since 1.0.2).

262144
preserve_newlines

Whether Wiki formatter should respect the new lines present in the Wiki text. If set to 'default', this is equivalent to 'yes' for new environments but keeps the old behavior for upgraded environments (i.e. 'no'). (since 0.11).

default
restrict_owner

Make the owner field of tickets use a drop-down menu. Be sure to understand the performance implications before activating this option. See Assign-to as Drop-Down List.

Please note that e-mail addresses are not obfuscated in the resulting drop-down menu, so this option should not be used if e-mail addresses must remain protected. (since 0.9)

false
workflow

Ordered list of workflow controllers to use for ticket actions (since 0.11).

ConfigurableTicketWorkflow

[ticket-custom]

In this section, you can define additional fields for tickets. See TracTicketsCustomFields for more details.

[ticket-workflow]

The workflow for tickets is controlled by plugins. By default, there's only a ConfigurableTicketWorkflow component in charge. That component allows the workflow to be configured via this section in the trac.ini file. See TracWorkflow for more details.

(since 0.11)

[timeline]

abbreviated_messages

Whether wiki-formatted event messages should be truncated or not.

This only affects the default rendering, and can be overriden by specific event providers, see their own documentation. (Since 0.11)

enabled
changeset_collapse_events

Whether consecutive changesets from the same author having exactly the same message should be presented as one event. That event will link to the range of changesets in the log view. (since 0.11)

false
changeset_long_messages

Whether wiki-formatted changeset messages should be multiline or not.

If this option is not specified or is false and wiki_format_messages is set to true, changeset messages will be single line only, losing some formatting (bullet points, etc).

false
changeset_show_files

Number of files to show (-1 for unlimited, 0 to disable).

This can also be location, for showing the common prefix for the changed files. (since 0.11).

0
default_daysback

Default number of days displayed in the Timeline, in days. (since 0.9.)

30
max_daysback

Maximum number of days (-1 for unlimited) displayable in the Timeline. (since 0.11)

90
newticket_formatter

Which formatter flavor (e.g. 'html' or 'oneliner') should be used when presenting the description for new tickets. If 'oneliner', the [timeline] abbreviated_messages option applies. (since 0.11).

oneliner
ticket_show_details

Enable the display of all ticket changes in the timeline, not only open / close operations (since 0.9).

false

[trac]

auth_cookie_lifetime

Lifetime of the authentication cookie, in seconds.

This value determines how long the browser will cache authentication information, and therefore, after how much inactivity a user will have to log in again. The default value of 0 makes the cookie expire at the end of the browsing session. (since 0.12)

0
auth_cookie_path

Path for the authentication cookie. Set this to the common base path of several Trac instances if you want them to share the cookie. (since 0.12)

(no default)
authz_file

The path to the Subversion authorization (authz) file. To enable authz permission checking, the AuthzSourcePolicy permission policy must be added to [trac] permission_policies.

(no default)
authz_module_name

The module prefix used in the authz_file for the default repository. If left empty, the global section is used.

(no default)
auto_preview_timeout

Inactivity timeout in seconds after which the automatic wiki preview triggers an update. This option can contain floating-point values. The lower the setting, the more requests will be made to the server. Set this to 0 to disable automatic preview. The default is 2.0 seconds. (since 0.12)

2.0
auto_reload

Automatically reload template files after modification.

disabled
backup_dir

Database backup location

db
base_url

Reference URL for the Trac deployment.

This is the base URL that will be used when producing documents that will be used outside of the web browsing context, like for example when inserting URLs pointing to Trac resources in notification e-mails.

(no default)
check_auth_ip

Whether the IP address of the user should be checked for authentication (since 0.9).

false
database

Database connection string for this project

sqlite:db/trac.db
debug_sql

Show the SQL queries in the Trac log, at DEBUG level. (Since 0.11.5)

disabled
default_charset

Charset to be used when in doubt.

utf-8
default_date_format

The date format. Valid options are 'iso8601' for selecting ISO 8601 format, or leave it empty which means the default date format will be inferred from the browser's default language. (since 1.0)

(no default)
default_dateinfo_format

The date information format. Valid options are 'relative' for displaying relative format and 'absolute' for displaying absolute format. (since 1.0)

relative
default_handler

Name of the component that handles requests to the base URL.

Options include TimelineModule, RoadmapModule, BrowserModule, QueryModule, ReportModule, TicketModule and WikiModule. The default is WikiModule. (since 0.9)

WikiModule
default_language

The preferred language to use if no user preference has been set. (since 0.12.1)

(no default)
default_timezone

The default timezone to use

(no default)
genshi_cache_size

The maximum number of templates that the template loader will cache in memory. The default value is 128. You may want to choose a higher value if your site uses a larger number of templates, and you have enough memory to spare, or you can reduce it if you are short on memory.

128
htdocs_location

Base URL for serving the core static resources below /chrome/common/.

It can be left empty, and Trac will simply serve those resources itself.

Advanced users can use this together with trac-admin ... deploy <deploydir> to allow serving the static resources for Trac directly from the web server. Note however that this only applies to the <deploydir>/htdocs/common directory, the other deployed resources (i.e. those from plugins) will not be made available this way and additional rewrite rules will be needed in the web server.

(no default)
ignore_auth_case

Whether login names should be converted to lower case (since 0.9).

false
jquery_location

Location of the jQuery JavaScript library (version 1.7.2).

An empty value loads jQuery from the copy bundled with Trac.

Alternatively, jQuery could be loaded from a CDN, for example: http://code.jquery.com/jquery-1.7.2.min.js, http://ajax.aspnetcdn.com/ajax/jQuery/jquery-1.7.2.min.js or https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js.

(since 1.0)

(no default)
jquery_ui_location

Location of the jQuery UI JavaScript library (version 1.8.21).

An empty value loads jQuery UI from the copy bundled with Trac.

Alternatively, jQuery UI could be loaded from a CDN, for example: https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js or http://ajax.aspnetcdn.com/ajax/jquery.ui/1.8.21/jquery-ui.min.js.

(since 1.0)

(no default)
jquery_ui_theme_location

Location of the theme to be used with the jQuery UI JavaScript library (version 1.8.21).

An empty value loads the custom Trac jQuery UI theme from the copy bundled with Trac.

Alternatively, a jQuery UI theme could be loaded from a CDN, for example: https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/themes/start/jquery-ui.css or http://ajax.aspnetcdn.com/ajax/jquery.ui/1.8.21/themes/start/jquery-ui.css.

(since 1.0)

(no default)
mainnav

Order of the items to display in the mainnav navigation bar, listed by IDs. See also TracNavigation.

wiki, timeline, roadmap, browser, tickets, newticket, search
metanav

Order of the items to display in the metanav navigation bar, listed by IDs. See also TracNavigation.

login, logout, prefs, help, about
never_obfuscate_mailto

Never obfuscate mailto: links explicitly written in the wiki, even if show_email_addresses is false or the user doesn't have EMAIL_VIEW permission (since 0.11.6).

false
permission_policies

List of components implementing IPermissionPolicy, in the order in which they will be applied. These components manage fine-grained access control to Trac resources. Defaults to the DefaultPermissionPolicy? (pre-0.11 behavior) and LegacyAttachmentPolicy? (map ATTACHMENT_* permissions to realm specific ones)

DefaultPermissionPolicy, LegacyAttachmentPolicy
permission_store

Name of the component implementing IPermissionStore, which is used for managing user and group permissions.

DefaultPermissionStore
pg_dump_path

Location of pg_dump for Postgres database backups

pg_dump
repository_dir

Path to the default repository. This can also be a relative path (since 0.11).

This option is deprecated, and repositories should be defined in the repositories section, or using the "Repositories" admin panel. (since 0.12)

(no default)
repository_sync_per_request

List of repositories that should be synchronized on every page request.

Leave this option empty if you have set up post-commit hooks calling trac-admin $ENV changeset added on all your repositories (recommended). Otherwise, set it to a comma-separated list of repository names. Note that this will negatively affect performance, and will prevent changeset listeners from receiving events from the repositories specified here. The default is to synchronize the default repository, for backward compatibility. (since 0.12)

(default)
repository_type

Default repository connector type. (since 0.10)

This is also used as the default repository type for repositories defined in TracIni#repositories-section repositories or using the "Repositories" admin panel. (since 0.12)

svn
request_filters

Ordered list of filters to apply to all requests (since 0.10).

(no default)
resizable_textareas

Make <textarea> fields resizable. Requires JavaScript. (since 0.12)

true
secure_cookies

Restrict cookies to HTTPS connections.

When true, set the secure flag on all cookies so that they are only sent to the server on HTTPS connections. Use this if your Trac instance is only accessible through HTTPS. (since 0.11.2)

disabled
show_email_addresses

Show email addresses instead of usernames. If false, email addresses are obfuscated for users that don't have EMAIL_VIEW permission. (since 0.11)

false
show_ip_addresses

Show IP addresses for resource edits (e.g. wiki). Since 1.0.5 this option is deprecated and will be removed in 1.3.1. (since 0.11.3)

false
timeout

Timeout value for database connection, in seconds. Use '0' to specify no timeout. (Since 0.11)

20
use_base_url_for_redirect

Optionally use [trac] base_url for redirects.

In some configurations, usually involving running Trac behind a HTTP proxy, Trac can't automatically reconstruct the URL that is used to access it. You may need to use this option to force Trac to use the base_url setting also for redirects. This introduces the obvious limitation that this environment will only be usable when accessible from that URL, as redirects are frequently used. (since 0.10.5)

disabled
use_chunked_encoding

If enabled, send contents as chunked encoding in HTTP/1.1. Otherwise, send contents with Content-Length header after entire of the contents are rendered. (since 1.0.6)

false
use_xsendfile

When true, send a X-Sendfile header and no content when sending files from the filesystem, so that the web server handles the content. This requires a web server that knows how to handle such a header, like Apache with mod_xsendfile or lighttpd. (since 1.0)

false
wiki_toolbars

Add a simple toolbar on top of Wiki <textarea>s. (since 1.0.2)

true
xsendfile_header

The header to use if use_xsendfile is enabled. If Nginx is used, set X-Accel-Redirect. (since 1.0.6)

X-Sendfile

[versioncontrol]

allowed_repository_dir_prefixes

Comma-separated list of allowed prefixes for repository directories when adding and editing repositories in the repository admin panel. If the list is empty, all repository directories are allowed. (since 0.12.1)

(no default)

[wiki]

ignore_missing_pages

Enable/disable highlighting CamelCase links to missing pages (since 0.9).

false
max_size

Maximum allowed wiki page size in characters. (since 0.11.2)

262144
render_unsafe_content

Enable/disable the use of unsafe HTML tags such as <script> or <embed> with the HTML WikiProcessor (since 0.10.4).

For public sites where anonymous users can edit the wiki it is recommended to leave this option disabled (which is the default).

false
safe_schemes

List of URI schemes considered "safe", that will be rendered as external links even if [wiki] render_unsafe_content is false. (since 0.11.8)

cvs, file, ftp, git, irc, http, https, news, sftp, smb, ssh, svn, svn+ssh
split_page_names

Enable/disable splitting the WikiPageNames with space characters (since 0.10).

false


See also: TracGuide, TracAdmin, TracEnvironment

Last modified 10 years ago Last modified on 2015-02-28 01:29:08