[tahoe-dev] ODROID-U2 (linux) tahoe-lafs 1.10.0 initial report

[jason.johnson at p7n.net]

By trial what do you mean? Is there a setup someplace I can test it? I have
done several every bit verify operations. The biggest one being on a folder
I had to make healthy again. I am not uploading files larger then 1g
currently. I would like to put a monitor of some kind on the bones. So far
they are running well. What would you suggest I use for monitoring them? I
ask because there are lots of tools and I would like to stay within tahoe
dev realm of things.

Here is a pic of it for shows and such. There is a camera in the middle for
taking peoples pics that stare at it for more than a few min. That's running
motion.

 

Jason

 

 

From: Garonda Rodian [mailto:deepside at hotmail.com] 
Sent: Wednesday, October 16, 2013 8:54 PM
To: Jason Johnson; tahoe-dev at tahoe-lafs.org
Subject: RE: [tahoe-dev] ODROID-U2 (linux) tahoe-lafs 1.10.0 initial report

 

How fast does the Atom blade run the trial?  I'm assuming the BeagleBone
Blacks can't complete it due to lack of RAM.

Do the BeagleBone Blacks have a hardware watchdog?

Separately, how many "Every bit" verify operations have you done, and how
well did they go?  

For anyone else trying an ODROID-U2, I'm using the image from 

 I found out you have to do cp /boot/boot-hdmi-1080p60hz.scr /boot/boot.scr
in order to get HDMI working properly at 1920x1080.  I'm still working on
getting files to it, after which I should be able to really try some
intertesting!

Are there any benchmarking modes for tahoe-lafs?  I'd like to see the
throughput for the encryption step, and for the zfec step, and the hashing,
etc., to be able to compare setups.

  _____  

Date: Wed, 16 Oct 2013 09:16:58 -0500
From: Jason.Johnson at p7n.net <mailto:Jason.Johnson at p7n.net> 
To: deepside at hotmail.com <mailto:deepside at hotmail.com> ;
tahoe-dev at tahoe-lafs.org <mailto:tahoe-dev at tahoe-lafs.org> 
Subject: RE: [tahoe-dev] ODROID-U2 (linux) tahoe-lafs 1.10.0 initial report

This is cool! Currently I have 8 beaglebone blacks and a small Atom blade as
the introducer and helper. I am looking for people to connect to my grid for
testing. I even took the hard drive out of the introducer and one node
formated them and put tahoe 1.10 i was able to repair the grid no prob. 

On 16/10/13 01:28:54,
Garonda Rodian <deepside at hotmail.com <mailto:deepside at hotmail.com> > wrote:

My ODROID-U2, Debian Wheezy, LXFE has successfully arrived, booted from
MicroSD, and run.

python setup.py build failed just after it didn't find tahoe-deps, until I
installed my usual set of packages (including, but not limited to,
python-dev), after which it worked fine.  

python setup.py trial succeed with 6 skipped and 2 expected failures in
something over 1500 seconds, typically using 100% of one out of four cores,
and the maximum amount of total RAM in use I happened to see (htop) was on
the order of 561MB - since it has 2GB of RAM, that's more than fine.

Further testing to follow - I have high hopes it can serve as an introducer
+ storage nodes, or even a helper/client gateway.  If I can get a Gigabit
USB2 card working, perhaps it'll even break the 10MB/s limit as a storage
node!

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://tahoe-lafs.org/pipermail/tahoe-dev/attachments/20131016/b52f04ff/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 35588 bytes
Desc: not available
URL: <http://tahoe-lafs.org/pipermail/tahoe-dev/attachments/20131016/b52f04ff/attachment-0001.jpg>